Those of us who have used springs know that the spring is actually a mechanical part that uses elasticity to work. The spring is a part made of elastic material that deforms under the action of external force, and the spring returns to its original state after the external force is removed. "Spring", what are the key reasons that endanger the application of springs?
Usually made of spring steel, the types of springs are complex and diverse, according to the shape, the key are high temperature springs, stainless steel springs, special-shaped springs, etc. Springs are used in many places, and there are many spring factories currently producing springs. In the whole process of applying the spring, it will be harmed by certain factors, so that the actual effect of the spring cannot be better played.
1. Depending on the material of the spring, the yield strength is different. Therefore, whether it is in production or application, you should pay attention to the specific material condition, the application occasion and the degree of yield.
2. The quality of the spring will also jeopardize the later application. If cracks or scars have already appeared during production, there will be fractures in the whole process of application.
3. The size of the spring is different. Some materials are larger in size, while others are smaller. These are the strength conditions that endanger the application fatigue, so the size must be selected as the appropriate one. The spring factory told us that when the spring is produced, the application and storage will be different, so there will be different levels of corrosion, and some rust spots appear on the surface, which is a sign that the spring is gradually fatigued , this little spot will make the spring directly broken. That kind of paralysis is rusted, you should be more careful, don't use it lightly.
The reasons that endanger the application of springs are mainly due to the above aspects. When carrying out production and selection, we should pay attention, and try to choose the kind of products with good quality and elasticity to ensure normal application in the future.
